We are very happy because next July we will have two new Yamaha models that offer a highly aesthetic, small and functional audio solution distributed for cafes, restaurants and even spaces such as meeting rooms or classrooms where Require microphone. We refer to the MA2030 and PA2030 , a cute couple that we are sure will include in your ” wish list “

GENERAL CHARACTERISTICS
The MA2030 is a mixer-amplifier and the PA2030 is an amplifier only, the MA2030 features a three-channel mixer ( Bass / Treble ); The input one (on the front panel with combo connector XLR / Jack and 1/8 “Jack and with Euroblock on the back) allows to connect either a microphone for voceo or any portable device such as your iPhone or smartphone for ambient music , The other two inputs are in stereo RCA and are located on the rear panel.

MA20302

The EQ is a very convenient tone control for “bass” and “treble” adjustment of any of the stereo audio sources. The EQ includes a processor that increases harmonics to the signal to improve it. Both the MA2030 and the PA2030 include an EQ adjustment for the speakers via rear panel DIP switches , ideal for when using the Yamaha VXC and VXS series speakers.
MA20303 MA20304 MA20305

Stereo audio sources can be connected (in addition to the 1/8 “front jack) via standard RCA connectors, a line output allows you to send the signal to the PA2030 when additional amplification is required for more speakers. An RJ45 connector offers the possibility to install the optional remote panel model DCP1V4Sand operate the equipment remotely; The two position switch is used to configure the MA2030 to operate with transformerless or transformerless speakers connected via simple screws. Like most equipment designed for professional use and installation, the power cord is detachable, which offers an advantage in providing maintenance or service to installed equipment.

MA20306

An important feature is the DSP technology implemented from the experience that Yamaha has in the area of ​​professional equipment for sound. feedback suppressor comes into play when any of the microphones picks up ambient sound from the speakers, all in an automatic and smooth way that offers even volume without jerky changes.

CONFIGURATION EXAMPLE FOR A COFFEE SHOP
The following figure shows an ideal system for a cafe, bar or restaurant using a MA2030 and a PA2030with 70 volt line speakers, amplifying a total of 16 ceiling loudspeakers model VXC4 in two zones with its transformer (taps to 3.8 W) . The control panel of the MA2030 and PA2030 can be used to independently control the volume in each of its zones, while the DCP1V4S remote control panel allows general volume adjustments. Since the MA2030 simultaneously accepts signals from audio players and microphones, this simple system can handle BGM (ambient music) as well as voceo for any special event. This product is great keeping in mind there is constantly loud sounds such as the coffee makers, other people’s talking, etc.

MA20307

EXAMPLE OF CONFIGURATION FOR A CLASSROOM
The following system is a simple solution for a classroom, where one channel of the MA2030 feeds two VS6 speakers on the front and two other ceiling loudspeakers model VXC4 to the other channel. It is possible to connect a microphone and any audio source such as the audio of some presentation on computer.

MA203079

SPECIFICATIONS
MA203078

MA2030
Lo-Z / Hi-Z amplifier mixer with class D amplification (Lo-Z: 30W x2ch, Hi-Z: 60W x1ch), equipped with 3 stereo inputs, 2 microphone inputs and DSP processor for music and voice playback Through microphone.

  • Easy installation with friendly interface and simple operation
  • 3 stereo line inputs and 2 microphone inputs
  • Advanced DSP functions for music and microphone playback
  • Direct coupling amplifier or high impedance (70V / 100V)
  • EQ with signal enhancement functions
  • EQ parameters included for better performance with the Yamaha VXC and VXS series loudspeakers
  • Expansion of zones through the addition of PA2030
  • Remote volume control and switching via optional panel model DCP1V4S
  • Media rack unit

PA2030
Amplifier Lo-Z / Hi-Z with Class-D amplification (Lo-Z: 30W x2ch, Hi-Z: 60W x1ch), equipped with two types of line input that allow connection with the MA2030 amplifier-mixer.

  • Easy installation with friendly interface and simple operation
  • Direct coupling amplifier or high impedance (70V / 100V)
  • EQ parameters included for better performance with the Yamaha VXC and VXS series loudspeakers
  • Expansion of zones through the addition of MA2030
  • Media rack unit